Welcome, Guest. Please login or register.

Author Topic: 1975 Polaris TX 440 resurrection  (Read 2556 times)

TXFAN

  • SnoPro
  • *****
  • Posts: 159
1975 Polaris TX 440 resurrection
« on: August 28, 2020, 12:51:01 am »
Just recently bought three TX's and some parts from a gentleman in western NY.  At first I thought that this TX was to be a parts sled, but when I got it home and started looking at it, I found it to be a diamond in the rough, it is actually quite straight.   The original 04 motor is missing, but the original pipes and 38mm carbs were used on a 398 charger engine that someone had nicely grafted into the sled.  I was told it ran pretty good, but I have an 05 motor that I will use until I can source an 04 short block.   I also have a nice original seat that will go on the sled.   This sled would restore very nicely, but I already have a cherry 75 440, so I will resurrect this to a clean rider status and document it here.

Vintagesleds.com

  • Advertisement
  • ***

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #1 on: August 28, 2020, 12:53:50 am »
    Started disassembling the sled this evening.   I plan on taking it down to a roller and then wash it good.   I do not plan on any paint or body work, except for painting a decent set of shovel nose skis for it. 

    chris r

    • BS Hall Of Fame Member
    • ******
    • Posts: 10532
    Re: 1975 Polaris TX 440 resurrection
    « Reply #2 on: August 28, 2020, 11:20:43 am »
    Nice score. You should put it in the F.O.T.Y. contest on the 24/7 forum.  :)
    You can a have different opinion but you can't have a different truth.

    motorman45

    • SnoPro
    • *****
    • Posts: 887
    Re: 1975 Polaris TX 440 resurrection
    « Reply #3 on: August 28, 2020, 11:27:27 am »
    nice score for sure. love the pipes,  those were factory ?
    71 Puma dual carb mod
    71 Puma 303 mod
    71 lynx 303 mod

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #4 on: August 28, 2020, 01:42:51 pm »
    Actually the lot may be a good FOTY entry.  The pipes are indeed factory, a one year design.

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #5 on: January 29, 2021, 02:30:15 pm »
    finally finished the resurrection of this 75 440 last weekend.  Other projects had taken priority and this one got put on the back burner.   The -05 engine runs fantastic with the -04 pipes, no issues at all.  Found a decent used seat on ebay that had just enough wear to match the sled, so all of the parts match.   Other than the slightly wrong engine, it could be be mistaken for a real nice survivor original. 

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #6 on: January 29, 2021, 02:31:35 pm »
    On the snow, this will be a regular rider for me.

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #7 on: January 29, 2021, 02:39:35 pm »
    In the new storage barn, next to my cherry 75 440....

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #8 on: January 29, 2021, 02:46:19 pm »
    Before and after merge

    XCRacer440

    • SnoPro
    • *****
    • Posts: 1470
    Re: 1975 Polaris TX 440 resurrection
    « Reply #9 on: January 29, 2021, 03:31:15 pm »
    Beautiful sled. That year is one of my favorites along with the twin pipes for that year only. Do you have a video of it running?

    TXFAN

    • SnoPro
    • *****
    • Posts: 159
    Re: 1975 Polaris TX 440 resurrection
    « Reply #10 on: January 29, 2021, 03:42:10 pm »
    XCRacer440, I will shoot some vid this weekend.