Welcome, Guest. Please login or register.

Author Topic: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones  (Read 3165 times)

SRX SnoPro

  • SnoPro
  • *****
  • Posts: 3206
  • Western WI
Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
« Reply #15 on: June 08, 2020, 06:23:43 pm »
That can easily be seen from your completed projects, and why I mentioned it.   

« Last Edit: June 09, 2020, 01:39:21 am by SRX SnoPro »

Vintagesleds.com

  • Advertisement
  • ***

    Tom Priebe

    • SnoPro
    • *****
    • Posts: 1466
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #16 on: June 08, 2020, 06:58:01 pm »
    Might be a Longshot, buy what about the guy from Scandinavia somewhere building one based on an original?
    Pay no attention to the man behind the green curtain!

    Vics stuff

    • BS Hall Of Fame Member
    • ******
    • Posts: 3861
    • Go Big Or Go Home
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #17 on: June 08, 2020, 07:46:41 pm »

    Thank you SRX SnoPro  for the compliment.
     Tom Priebe ! The guy from Scandinavia does not use the same  thickness materials as originals. I have spoken to guys who have purchased pieces from him. His list of parts indicate that also. Not sure how close his parts are to original. That is why I am going to go through the process like all my other parts and make them in my shop. They do not always turn out correct the first time , so many times I have to  do over and go through the learning process to turn out correct parts. It is not about turning a profit but getting it right. I never make any money at this .
     Good thing I have a machine shop in my building to make the parts but it is a slow process.
     Vic       ;D ;D ;D ;D ;D ;D ;D ;D ;D
    « Last Edit: June 08, 2020, 07:48:53 pm by Vics stuff »

    davco

    • Super-Mod
    • ****
    • Posts: 73
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #18 on: September 14, 2020, 02:02:15 pm »
    who is this hairball77,,,,,,,,,,,,,,,,I don't recall ever doing any thing for who ever you are??????

    Hairball27

    • Super-Mod
    • ****
    • Posts: 77
    • MOVE YOUR JUNK .... so i can put my stuf there
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #19 on: October 11, 2020, 03:36:28 pm »
    You built a chassis and had it shipped out to Syracuse for pick up, im in Ontario, ring a bell now Dave?

    davco

    • Super-Mod
    • ****
    • Posts: 73
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #20 on: October 13, 2020, 01:08:17 pm »
    I'm sorry you were disappointed with your chassis, as I recall, you wanted to finish it yourself. the front pieces around the shocks!!

    38txracer

    • Modified
    • ***
    • Posts: 30
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #21 on: October 18, 2020, 07:13:56 pm »
    I got a RXL chassis from you Dave and I've been very happy with it here in NY. You stated it was thicker than original so it would hold up to racing and it's been 4 years or so of racing and has held up nicely.

    davco

    • Super-Mod
    • ****
    • Posts: 73
    Re: Parts for the 1979 - 1980 Arctic Cat Sno Pro clones
    « Reply #22 on: October 23, 2020, 12:42:32 pm »
    Thank You, all of the sleds I built have been to todays ISR rules and always stronger than originals.  Such as 1" spindles with needel bearings, for example............Dave O