Welcome, Guest. Please login or register.

Author Topic: 1978 SRX EFI  (Read 3372 times)

shane lang

  • Super-Mod
  • ****
  • Posts: 65
Re: 1978 SRX EFI
« Reply #30 on: December 25, 2019, 12:41:13 pm »
First time in 30 plus years that itís been on skis and track!

Vintagesleds.com

  • Advertisement
  • ***

    slowestsled

    • SnoPro
    • *****
    • Posts: 1550
    Re: 1978 SRX EFI
    « Reply #31 on: April 01, 2020, 04:01:01 pm »
    did you get it running?

    sledrescueguy

    • SnoPro
    • *****
    • Posts: 143
    Re: 1978 SRX EFI
    « Reply #32 on: April 03, 2020, 08:11:21 pm »
    ^^ what he said

    shane lang

    • Super-Mod
    • ****
    • Posts: 65
    Re: 1978 SRX EFI
    « Reply #33 on: June 08, 2020, 04:52:26 pm »
    its on the backburner with my race sled taking priority right now. on the plus side i found a mass airflow sensor that will work with the ecu that i have. going to oxy- acetylene weld up an aluminum intake manifold when i get some time here.

    HudCo

    • SnoPro
    • *****
    • Posts: 317
    Re: 1978 SRX EFI
    « Reply #34 on: June 11, 2020, 10:31:36 pm »
    i have a mile long x half mile long field next to me that iwould sure like to take it for a spin in

    shane lang

    • Super-Mod
    • ****
    • Posts: 65
    Re: 1978 SRX EFI
    « Reply #35 on: June 13, 2020, 11:11:07 pm »
    Really trying to muster up some ambition to finish this build before the snow flies again. So close, but so far! In the meantime Iíve been diligently porting my GPX cylinders and building a few sets of srx pipes! Iíll get back on this soon and post an update after the GPX dyno work is complete.

    shane lang

    • Super-Mod
    • ****
    • Posts: 65
    Re: 1978 SRX EFI
    « Reply #36 on: June 13, 2020, 11:13:47 pm »
    Shown above are two different pipes. The large D-max pipes have caused a great deal of controversy on different pages. They are hitting the dyno soon on a heavily modified set of srx cylinders for a race build.

    shane lang

    • Super-Mod
    • ****
    • Posts: 65
    Re: 1978 SRX EFI
    « Reply #37 on: June 13, 2020, 11:18:56 pm »
    Here is a GPX top ended race engine that Iíve been working on. Over 40 hours of porting in the last month in my spare time I canít show the inside due to obvious reasons, but every mm of the engine has been utilized to the max and I fully expect it to be north of a 105hp goal with the pipes Iím currently building.

    shane lang

    • Super-Mod
    • ****
    • Posts: 65
    Re: 1978 SRX EFI
    « Reply #38 on: June 30, 2020, 10:44:30 am »
    Still on sidetrack mission haha. Redesigned and built the srx drag pipes for my gpx. Starting to get the hang of this pipe building. Might end up making another set before the dyno session.

    mikem4

    • SnoPro
    • *****
    • Posts: 777
    Re: 1978 SRX EFI
    « Reply #39 on: June 30, 2020, 04:41:53 pm »
    I'd say your getting the hang of it. Those pipes look great.